AAXA 4K1 4K LED Projector

AAXA P7 LED Pico Projector

AAXA S1 Switch Mini Projector

AAXA Neo Smart Pico Projector

AAXA P6 Pico Projector

AAXA P2B Pico Projector

AAXA P300 Neo Pico Projector

AAXA P2A Pico Projector

1. Turn the M6 on its back

2. Locate the two screws on the back side.

3. Take out the two screws with a small Phillips head screwdriver.

4. Remove the battery cover from the M6.

5. Insert the battery housing with the battery inside into the M6.

6. Connect the wire coming out of the battery housing into the 4-pin connection.

7. Make sure the holes in the battery housing are lined up with the screws.

8. Gently push battery housing down until it is flush with the device.

9. Re screw the two screws taken out before

10. Enjoy your battery-powered projector .